WARNING:
This product is intended for OFF-ROAD and DYNO testing only.
Use on public roads may violate local laws. We are
NOT responsible for any vehicle damage, malfunction, or engine failure.
Buyer assumes all risk and liability. Use at your own risk.
Buyer assumes all risk and liability. Use at your own risk.
PRODUCT DESCRIPTION
OPERATING MODES
Change operating profile with 4 high-beam flashes
Choose the desired profile using 4 quick high-beam flashes.
The module confirms selection using hazard indicator flashes.
1
cel-blue
FREEZE
Distance recording: 0%
SPEEDOMETER DISPLAYS
Cluster shows 0 km/h, but HUD displays real speed
INDICATION
Speedometer needle will show 5 km/h
EXAMPLE
100 km/h – 0 km/h
100 km – 0 km
2
cel-blue
REDUCED
Distance recording: 10%
SPEEDOMETER DISPLAYS
Cluster shows only 10% of the speed (e.g. 10 km/h at 100 km/h), while the HUD shows the true speed
INDICATION
Speedometer needle will show 10 km/h
EXAMPLE
100 km/h – 10 km/h
100 km – 10 km
4
cel-purple
BALANCED
Distance recording: 50%
SPEEDOMETER DISPLAYS
Cluster shows 50% of the speed (e.g. 50 km/h at 100 km/h), while the HUD shows the true speed
INDICATION
Speedometer needle will show 15 km/h
EXAMPLE
100 km/h – 50 km/h
100 km – 50 km
4
cel-green
BYPASS
Distance recording: 100%
SPEEDOMETER DISPLAYS
Shows real speed
INDICATION
Speedometer needle will show 20 km/h
EXAMPLE
100 km/h – 100 km/h
100 km – 100 km
MODE SWITCHING
Switch modes anytime by performing 4 quick high-beam flashes.
The module confirms the selected mode using 1–5 hazard flashes:
âš x1 flash = Mode 01Â âš x2 flash = Mode 02Â âš x3 flash = Mode 03Â âš x4 flash = Mode 04Â âš x5 flash = Mode 05
Selected mode remains saved after ignition cycle.
INSTANT SWITCHING
Change modes anytime in seconds
SETTINGS SAVED
Selected mode remains stored after ignition cycle
PLUG & PLAY
No permanent modifications required. 100% safe
