No products in the cart.
Subaru Legacy Mileage Odometer Blocker
2020–2026
Price range: €260.00 through €310.00
Shipping calculated at checkout.
- Subaru Legacy 2020–2026. Confirm the dashboard/cluster and connector version before ordering.
- Plug-and-play / no cutting or soldering where the selected CEL hardware supports this installation; verify exact connector and installation location.
- Switch between operating modes in seconds.
- Actual speed is displayed in all three modes.
WARNING:
This product is intended for OFF-ROAD and DYNO testing only.
Use on public roads may violate local laws. We are
NOT responsible for any vehicle damage, malfunction, or engine failure.
Buyer assumes all risk and liability. Use at your own risk.
Buyer assumes all risk and liability. Use at your own risk.
PRODUCT DESCRIPTION
OPERATING MODES
Change operating profile with 4 high-beam flashes
Choose the desired profile using 4 quick high-beam flashes.
The driver door-open indicator on the instrument cluster confirms the selected mode.
1
cel-blue
FREEZE
Distance recording: 0%
SPEEDOMETER DISPLAYS
Actual speed displayed
INDICATION
Driver door-open indicator: 1 second
EXAMPLE
100 km/h – 100 km/h
100 km – 0 km
2
cel-purple
LIMITED
Distance recording: 50%
SPEEDOMETER DISPLAYS
Actual speed displayed
INDICATION
Driver door-open indicator: 2 seconds
EXAMPLE
100 km/h – 100 km/h
100 km – approximately 50 km
3
cel-green
BYPASS
Distance recording: 100%
SPEEDOMETER DISPLAYS
Actual speed displayed
INDICATION
Driver door-open indicator: 3 seconds
EXAMPLE
100 km/h – 100 km/h
100 km – 100 km
MODE SWITCHING
Switch to the next mode using 4 high-beam flashes. Leave no more than 3 seconds between successive flashes.
Mode sequence: FREEZE → LIMITED → BYPASS → FREEZE.
The driver door-open indicator appears on the instrument cluster for:
1 second = FREEZE (0%)
2 seconds = LIMITED (approximately 50%)
3 seconds = BYPASS (100%)
The speedometer displays actual speed in every mode. The module starts in FREEZE after power-up.
INSTANT SWITCHING
Change modes anytime in seconds
STARTUP MODE
The module starts in FREEZE after power-up
PLUG & PLAY
Vehicle-specific connectors. Confirm the required version before ordering.
