No products in the cart.
SEAT Ateca Mileage Odometer Blocker
2016–2024
Price range: €260.00 through €310.00
Shipping calculated at checkout.
- Supported SEAT Ateca years: 2016–2024. Confirm exact production date, dashboard/cluster and connector before ordering.
- Plug-and-play / no cutting or soldering where the selected CEL hardware supports this installation; verify exact connector and installation location.
- Switch between operating modes in seconds.
- Actual speed is displayed in all four modes.
WARNING:
This product is intended for OFF-ROAD and DYNO testing only.
Use on public roads may violate local laws. We are
NOT responsible for any vehicle damage, malfunction, or engine failure.
Buyer assumes all risk and liability. Use at your own risk.
Buyer assumes all risk and liability. Use at your own risk.
PRODUCT DESCRIPTION
OPERATING MODES
Change operating profile with 5 high-beam flashes
Choose the desired profile using 5 quick high-beam flashes.
The hazard indicators confirm the selected mode with 1, 2, 3 or 4 flashes.
1
cel-blue
LIMITED 10%
Distance recording: 10%
SPEEDOMETER DISPLAYS
Actual speed displayed
INDICATION
1 hazard confirmation flash
EXAMPLE
100 km/h – 100 km/h
100 km – approximately 10 km
2
cel-purple
LIMITED 20%
Distance recording: 20%
SPEEDOMETER DISPLAYS
Actual speed displayed
INDICATION
2 hazard confirmation flashes
EXAMPLE
100 km/h – 100 km/h
100 km – approximately 20 km
3
cel-blue
LIMITED 30%
Distance recording: 30%
SPEEDOMETER DISPLAYS
Actual speed displayed
INDICATION
3 hazard confirmation flashes
EXAMPLE
100 km/h – 100 km/h
100 km – approximately 30 km
4
cel-green
BYPASS
Distance recording: 100%
SPEEDOMETER DISPLAYS
Actual speed displayed
INDICATION
4 hazard confirmation flashes
EXAMPLE
100 km/h – 100 km/h
100 km – 100 km
MODE SWITCHING
Switch to the next mode using 5 high-beam flashes. Leave no more than 2 seconds between successive flashes.
Mode sequence: LIMITED 10% → LIMITED 20% → LIMITED 30% → BYPASS → LIMITED 10%.
Hazard indicator confirmation:
1 flash = approximately 10% distance recorded
2 flashes = approximately 20% distance recorded
3 flashes = approximately 30% distance recorded
4 flashes = BYPASS (100% distance recorded)
The speedometer displays actual speed in all four modes. The module starts in BYPASS after power-up.
INSTANT SWITCHING
Change modes anytime in seconds
STARTUP MODE
The module starts in BYPASS after power-up
PLUG & PLAY
Vehicle-specific connectors. Confirm the required version before ordering.
