No products in the cart.
Jeep Renegade Mileage Odometer Blocker
2014–2026
Price range: €190.00 through €240.00
Shipping calculated at checkout.
- Supported Jeep Renegade years: 2014–2026. Confirm exact production date, dashboard/cluster and connector before ordering.
- Plug-and-play / no cutting or soldering where the selected CEL hardware supports this installation; verify exact connector and installation location.
- Switch modes with 5 quick presses of the OK button.
- ON: Works; OFF: Factory behavior
WARNING:
This product is intended for OFF-ROAD and DYNO testing only.
Use on public roads may violate local laws. We are
NOT responsible for any vehicle damage, malfunction, or engine failure.
Buyer assumes all risk and liability. Use at your own risk.
Buyer assumes all risk and liability. Use at your own risk.
PRODUCT DESCRIPTION
OPERATING MODES
Change operating profile with 5 quick OK button presses
Press and release the OK button 5 times to switch between FREEZE and BYPASS.
The speedometer displays actual speed in both modes.
1
cel-blue
FREEZE
Distance recording: 0%
SPEEDOMETER DISPLAYS
Works normally
INDICATION
No confirmation flashes
EXAMPLE
100 km/h – 100 km/h
100 km – 0 km
2
cel-green
BYPASS
Distance recording: 100%
SPEEDOMETER DISPLAYS
Factory behavior
INDICATION
No confirmation flashes
EXAMPLE
100 km/h – 100 km/h
100 km – 100 km
MODE SWITCHING
Press and release the OK button 5 times in a quick sequence to select the other mode.
Keep the interval between presses under 2 seconds. Repeat the sequence to switch back.
Confirmation: this firmware does not generate confirmation flashes.
Selected mode remains saved after an ignition cycle.
INSTANT SWITCHING
Press OK 5 times to change modes
SETTINGS SAVED
Selected mode remains stored after ignition cycle
PLUG & PLAY
No permanent modifications required. 100% safe
