No products in the cart.
Ford F-150 Mileage Odometer Blocker
2018–2026
Price range: €250.00 through €300.00
Shipping calculated at checkout.
- Supported Ford F-150 years: 2018–2026. Confirm exact production date, dashboard/cluster and connector before ordering.
- Plug-and-play / no cutting or soldering where the selected CEL hardware supports this installation; verify exact connector and installation location.
- Switch between operating modes in seconds.
- Mode 1: Works; Mode 2: Works; Mode 3: Works; Mode 4: Factory behavior
WARNING:
This product is intended for OFF-ROAD and DYNO testing only.
Use on public roads may violate local laws. We are
NOT responsible for any vehicle damage, malfunction, or engine failure.
Buyer assumes all risk and liability. Use at your own risk.
Buyer assumes all risk and liability. Use at your own risk.
PRODUCT DESCRIPTION
OPERATING MODES
Change operating profile with 4 high-beam flashes
Choose the desired profile using 4 quick high-beam flashes.
The module confirms selection using hazard indicator flashes.
1
cel-blue
FREEZE
Distance recording: 0%
SPEEDOMETER DISPLAYS
Works
INDICATION
1 confirmation flash
EXAMPLE
100 km/h – 0 km/h
100 km – 0 km
2
cel-purple
LIMITED
Distance recording: 20%
SPEEDOMETER DISPLAYS
Works
INDICATION
2 confirmation flashes
EXAMPLE
100 km/h – 20 km/h
100 km – 20 km
3
cel-purple
BALANCED
Distance recording: 60%
SPEEDOMETER DISPLAYS
Works
INDICATION
3 confirmation flashes
EXAMPLE
100 km/h – 60 km/h
100 km – 60 km
4
cel-green
BYPASS
Distance recording: 100%
SPEEDOMETER DISPLAYS
Factory behavior
INDICATION
4 confirmation flashes
EXAMPLE
100 km/h – 100 km/h
100 km – 100 km
MODE SWITCHING
Switch modes anytime by performing 4 quick high-beam flashes.
The module confirms the selected mode using 1–4 hazard flashes:
⚠x1 flash = Mode 01 (FREEZE) ⚠x2 flashes = Mode 02 (LIMITED) ⚠x3 flashes = Mode 03 (BALANCED) ⚠x4 flashes = Mode 04 (BYPASS)
Selected mode remains saved after ignition cycle.
INSTANT SWITCHING
Change modes anytime in seconds
SETTINGS SAVED
Selected mode remains stored after ignition cycle
PLUG & PLAY
No permanent modifications required. 100% safe
