Toyota bZ4X Mileage Odometer Blocker
2022–2026
€230.00
Shipping calculated at checkout.
- Supported Toyota bZ4X years: 2022–2026. Confirm exact production date, dashboard/cluster and connector before publication/order.
- Plug-and-play / no cutting or soldering where the selected CEL hardware supports this installation; verify exact connector and installation location.
- Switch between operating modes in seconds.
- Mode 1: Works; Mode 2: Works; Mode 3: Factory behavior
Need Help?
WARNING:
This product is intended for OFF-ROAD and DYNO testing only.
Use on public roads may violate local laws. We are
NOT responsible for any vehicle damage, malfunction, or engine failure.
Buyer assumes all risk and liability. Use at your own risk.
Buyer assumes all risk and liability. Use at your own risk.
PRODUCT DESCRIPTION
OPERATING MODES
Change operating profile with 4 high-beam flashes
Choose the desired profile using 4 quick high-beam flashes.
The module confirms selection using hazard indicator flashes.
1
cel-blue
FREEZE
Distance recording: 0%
SPEEDOMETER DISPLAYS
Works
INDICATION
Vehicle indication
EXAMPLE
100 km/h – 0 km/h
100 km – 0 km
2
cel-blue
REDUCED
Distance recording: 1%
SPEEDOMETER DISPLAYS
Works
INDICATION
Vehicle indication
EXAMPLE
100 km/h – 1 km/h
100 km – 1 km
3
cel-green
BYPASS
Distance recording: 100%
SPEEDOMETER DISPLAYS
Factory behavior
INDICATION
Vehicle indication
EXAMPLE
100 km/h – 100 km/h
100 km – 100 km
MODE SWITCHING
Switch modes anytime by performing 4 quick high-beam flashes.
The module confirms the selected mode using 1–5 hazard flashes:
âš x1 flash = Mode 01Â âš x2 flash = Mode 02Â âš x3 flash = Mode 03Â âš x4 flash = Mode 04Â âš x5 flash = Mode 05
Selected mode remains saved after ignition cycle.
INSTANT SWITCHING
Change modes anytime in seconds
SETTINGS SAVED
Selected mode remains stored after ignition cycle
PLUG & PLAY
No permanent modifications required. 100% safe
